Loading

Landing Gear

by silverprinter, published

Landing Gear by silverprinter Apr 16, 2013

Description

This is the landing gear I made for my soon to be finished Tri-Copter / quad-copter.

It is made to be held onto 10mm wooden rods with small zip ties, so just print it, zip it, and fly!!

The cutouts keep the weight down, as well as a hopefully breaking away in a crash, saving the important and expensive stuff. So print a few extra in case of an emergency:)

Hope this helps someone!!!

Sacc

Recent Comments

view all
Any tips on how to make this a little longer in OpenSCAD? I tried but could only get it longer in both directions (top & Bottom) not sure how to cut it off at the top

More from R/C Vehicles

view more

Liked By

view all

Tags

License

Landing Gear by silverprinter is licensed under the Creative Commons - Attribution license.

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

<p>Any tips on how to make this a little longer in OpenSCAD? I tried but could only get it longer in both directions (top & Bottom) not sure how to cut it off at the top</p>

Top