Simple Printrbot Plus Filament Guide
by jameswood, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A really simple filament guide for any printer with 12mm rods. The large opening makes loading simple, and the loose fitting allows the guide to rotate and follow the print head as needed.
Try adding a piece of sponge or tissue around the filament, to keep it nice and clean. The guide will hold it in place.
Simple Printrbot Plus Filament Guide by jameswood is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving jameswood a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jameswood would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).