RepRapPro Mendel 40mm Fan Housing.
by KitDunagan, published
I created this to have better cooing for my Mendel. This will work for the First Multi-Head Mendel with the Horizontal X-Axis rods, this will not work with the newest Version with the vertically stacked X-axis smooth rods.
Attach this in one of the hot end locations not being used. And use the leveling screw to clamp it in place. Minor trimming may be needed to clear the leveling screw.
I've included my solid-works model so you can modify as desired. Or add the top few layers to make it closed if your printer can handle the bridging.
Print once to 100%.
Print the first 2 layers a second time.
Use a little CA Glue to attach them together to close up the shape
I recommend also gluing some aluminium foil to the underside to prevent drooping from heat bed/hot ends.
Liked ByView All
Give a Shout Out
RepRapPro Mendel 40mm Fan Housing. by KitDunagan is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving KitDunagan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure KitDunagan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).