Open Hardware Logo - OpenSCAD Generator
27
Likes
1310
Downloads
902
Views
Published on April 7, 2011
Description
I whipped up a little OpenSCAD script to parametrically generate the new Open Hardware Logo.
Source: github.com/clothbot/OSHW
Update 2011/04/07 21:38: I tweaked the 3D coin model after doing some test prints and have updated the .scad and .stl files accordingly.
Update 2011/04/09 14:37: I cleaned up the gear_tooth_2d() to be a simple polygon.
Source: github.com/clothbot/OSHW
Update 2011/04/07 21:38: I tweaked the 3D coin model after doing some test prints and have updated the .scad and .stl files accordingly.
Update 2011/04/09 14:37: I cleaned up the gear_tooth_2d() to be a simple polygon.
Instructions
Download the DXF variants for use in Inkscape or other 2D vector editors.
Download the STL for a 1 inch diameter "coin".
Download the OpenSCAD code to modify as you see fit.
Download the STL for a 1 inch diameter "coin".
Download the OpenSCAD code to modify as you see fit.
You must be logged in to post a comment.
pohssevenfive
on
January 18, 2012
said:
Hey clothbot I was surfing for pill reports the other day when I found this: http://www.pillreports.com/ind...
&
amp;id=28166. Your coin design seems to have been adapted for other purposes?
jimcook
on
September 8, 2011
said:
I printed one of the coins and it turned out good. I then decided to scale the coin up to print a coaster. I scaled it up 3.8 times. It turned out beautiful. The raised open hardware logo allows an area to collect any moisture.
License
Open Hardware Logo - OpenSCAD Generator by clothbot is licensed under the Attribution - Share Alike - Creative Commons license.
More from clothbot
Thanks for your great job on OSHW logo.
I just found a bit messy for my use the scale things in your script.
Wanna put the OSHW logo on objects, i adapt your script to use only one parameter : the desired logo external diameter.
http://www.thingiverse.com/thi...