Tablet CD Mount (Nexus 7)
by ArtLabKY, published
Who the heck uses CDs anymore? Use the slot to mount a Nexus 7 & immediately upgrade your ride with GPS, internet music & all the other luxuries of this digital age. The weight of the Nexus 7 helps hold the dock tight, even on bumpy roads.
Keep in mind though, I designed this for a '09 Mini Clubman so the SketchUp file is attached to widen/thin the hinges as needed (and alignment notches shouldn't change size unless you reflect that in the other parts as well.) The model is designed to be printed on any 5"x5"+ printer.
Feel free to make a derivative to fit your own tablet by adjusting the width/height of part 2. Sorry for the messy geometry.
Print all three parts and attach. Make sure the back face is flush so your Nexus 7 rests on a flat surface. You'll likely need to sand down the alignment notches a bit depending on the reliability of your machines.
Liked ByView All
Give a Shout Out
Tablet CD Mount (Nexus 7) by ArtLabKY is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure ArtLabKY would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).