Parametric skateboard wedge/riser
3
Likes
265
Downloads
375
Views
Published on April 10, 2011
Description
Print any riser/wedge you'll ever need for your skateboard or longboard.
Oldschool and newschool bolt pattern (or both).
Public domain. 3D printing is not a crime!
Oldschool and newschool bolt pattern (or both).
Public domain. 3D printing is not a crime!
Instructions
Requires the OpenSCAD MCAD library for the bolt sizes.
Parameters:
You might want to set the infill to solid if you expect to grind your gear and weight does not matter.
Print and skate.
Parameters:
/* length, width of wedge
height of side 1 and 2
drill oldschool and/or newschool pattern
bolt size (M)
NOTE: if both oldschool and newschool bits are set to 1,
the newschool pattern will be displaced to match on one side.
*/
You might want to set the infill to solid if you expect to grind your gear and weight does not matter.
Print and skate.
You must be logged in to post a comment.
License
More from relet
Love this skateboard riser/part. Wondering if anyone will post up other thicknesses and or other skateboard parts like Tailbones, Rails, Nosebones, etc. Rails are normally too long, but could be printed as 2 parts. Maybe even copers or lapers printed. Love to hear if PLA or ABS works best?
I recommend ABS, since PLA tends to shatter. This riser is actually parametric, so it can be printed in any thickness.