Ultimaker Printhead Cover, 2-pc.
by jwags55, published
Lightweight 2-piece Cover for Ultimaker Hotend (V2). I printed out the nice cover by Thingster that was based on the design from Gijs. I agree with Thingster - it really improves the look the Ultimaker extruder. I decided to tweak the design a bit. First, I lightened it up by about 40% and created an interlocking corner section.
Check out the updated version does not touch the wires:
Per request, I have created a cover for a dual extruder print head (PrintheadCover2X.stl). I have not tested out this design, so let me know if it does not work for some reason. It was a pretty quick hack - I just cut it in half and mirrored it.
Per request, I have included the source Autodesk Inventor CAD files.
I set wall thickness at 0.4 mm, layer height at 0.2 mm and 100% fill.
You'll need to rotate both parts for slicing. They are printed upside-down (grill on build platform) from the STL model orientation.
Liked ByView All
Give a Shout Out
Ultimaker Printhead Cover, 2-pc. by jwags55 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving jwags55 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jwags55 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).