Digital designs for real, physical objects. A Universe of Things!

Support bracket for Y idler on ToM

Created by
54weasels
Created on Apr 12, 2011
Derived from Support bracket for Y idler on ToM by tomlombardi

Derivative of thingiverse.com/thing:7022

When I printed out the original, everything worked OK (re-using the axis cap and all) but I was 3mm off somehow.
Didn't feel like messing around with the STL so I made it again in openscad.

The bolts are also a bit short, since they are supporting both this and the cap, but if you don't file down/drill out the holes more, they seem to actually support the bolts pretty well. If it comes off or starts to, I might change the design to have a countersink (I hope that's what it's called) for the nut to sit in - or you can just use longer bolts.

Downloads

Sort By

Date

Popular

File Type

y idler bracket.stl

287 kb / 89 downloads / 1 year ago

y idler bracket.scad

529 b / 65 downloads / 1 year ago

Who's Derived It?

They Like It

What's this?

Support bracket for Y idler on ToM by 54weasels is licensed under the Attribution - Share Alike - Creative Commons license.

© 2011 by 54weasels

Instructions

Unscrew the top 2 screws on your y-axis cap closest to the idler, put this on the idler and put the screws in. Really, follow the directions from the original.

Support bracket for Y idler on ToM

Downloads

Tags

Who's Derived It?

They Like It

Instructions

Comments

Latest From The Thingiverse Blog

Join Thingiverse®!

Things

Tools

Blog

About Thingiverse®