Customizable Solar Light Base
by drxenocide, published
Description
It is a replacement base for a solar light - because those POSs always break. A landscaping nail (diameter 1/4") gets hammered through the middle and then light pole slides on top.
Tags
License
Customizable Solar Light Base by drxenocide is licensed under the Creative Commons - Attribution license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Customize the dimensions (measurements are in mm)
Print it out,
Get a 6"x1/4" landscaping nail.
Hammer the nail throuugh the middle bore into the ground.
Fit the Solar Light on the base.
Customizable Solar Light Base by drxenocide is licensed under the Creative Commons - Attribution license.
Download All Files
(1 kb zip file)
File Name
Downloads
Size
Please Login to Comment
Thank you for this. I found best results using 100% infill and I am using a 12" x 3/8" landscaping spike from Home Depot. setting for opening for this galvanized spike is set to 11.5mm.
Thank you for this. I found best results using 100% infill and I am using a 12" x 3/8" landscaping spike from Home Depot. setting for opening for this galvanized spike is set to 11.5mm.