Dual Bottle/ bag holder for Baby Carriage
by tuster, published
This device allows you to attach up to two bottles or several bags to your baby carriage.
The bottle heads snap in tightly but can still be removed easily. Both the ring around the baby carriage handle and the connection of the two bottle holder parts have some play so the holder stays upright all the time. Even strong shakes to the carriage (rough roads, getting curbs up or down) are no problem.
The holder works for alcohol free beer (as shown in the pic) as well as real beer :) I personally prefer Augustiner Lager, the bigger diameter of the bottles is also ok for the holder. 0.33L beer bottles should not be used at all due to the fact that they should not be bought in the first place!
Print it with a high infill rate to make it robust but below 1.0 to allow some flexibility. I printed the bottom part on the side (with support) because it will be stronger in the up-axis later on. Maybe that's not necessary, tell me if rotating it 90Â° is fine as well..
You need a bolt and a nylock nut (!) to connect the two parts.
Liked ByView All
Give a Shout Out
Dual Bottle/ bag holder for Baby Carriage by tuster is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure tuster would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).