PrintrBoard Enclosure for PrintrBot Simple Metal
by MakersBox, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I got tired of reaching under the build plate to connect power and USB and the SD card.
I remixed http://www.thingiverse.com/thing:24460 to remove the exterior and lid screw holes and mounted the enclosure on the side.
Now all the connections conveniently located, and you can easily reach the reset button.
I did have to drill the power connector hole, which didn't work so well with infill. I would add it to the stl, or print it at 100% fill.
You will need to drill holes in your printer body!
You will need to add some length to the power connector.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
PrintrBoard Enclosure for PrintrBot Simple Metal by MakersBox is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving MakersBox a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure MakersBox would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).