Printable Spool End for PVC Pipe
by ianjohnson, published
Sides for a spool made from PVC pipe. The inner diameter should spin cleanly around 3/4" PVC.
Print, then stick it in the end of a 2" Schedule 40 PVC pipe. Use glue to secure it, or maybe put a screw through the pipe if you don't want it to be permanent.
For 1kg, the pipe should be around 6" long. This is made to print on a 150mm platform,
Liked ByView All
Give a Shout Out
Printable Spool End for PVC Pipe by ianjohnson is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ianjohnson a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ianjohnson would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).