Leveling Test Print

by DamianGto, published

Leveling Test Print by DamianGto Apr 26, 2013

Thing Info

4921Views 1068Downloads Found in 3D Printing Tests
Report Thing


This object is made for checking the level on the build platform. It could easy work on most 3D printers, but the default settings is for Makerbot Replicator 2X. You just need to scale it to the build platform size of your 3D printer.
It will also show how good your print will stay on the build platform.
The size is 245mm 150mm 0.2mm.
Scale it to the maximum size your 3D printer can use. Also change the height to what layer size you want to use. ex. if you use 0.3mm layer height then change to that height, so it only put down one layer.

If you want to test more layer then just add the height as many layer you want to have. Keep in mind it will take more plastic for every layer you use.


I made this with Autodesk 123D Design.

I also made this object for leveling: http://www.thingiverse.com/thing:70939

You can also see guides and other help on my wiki+ site

More from 3D Printing Tests

view more

Thing Info

4921Views 1068Downloads Found in 3D Printing Tests
Report Thing


Liked By

View All


Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

sounds good, but what do I do after its been printed?

If it looks good your printer works.
If not you need to adjust the printer.

This along with a dial indicator and holder helped me properly level my Replicator 2's build plate after a print and a half, plus one last print to verify it was indeed level.


Thanks for using it :-)
Have fun with printing stuff now :-)

After printing this over a year ago, I haven't had to touch my leveling screws at all

Sounds nice. I dont do that much either, after I added my carbon reinforcement. :-)