Cabinet Handle 3-1/2" (89mm)c.c.
by 2n2r5, published
I have gone 7 years without handles on these cabinets. Today, I got sick of it and printed out my solution.
After painting the cabinets and doors a color I didn't really like after I was done, I vowed to get new paint and repaint them. Some years later I still have that ugly paint and lost all of the hardware for the doors.
The test print is an ulgy orange but I will be printing the a complete set in silver or white. The holes are set for threading in a #8-32 machine screw and are 6.5 mm deep (a little over 1/4"). No extra drilling should be required on the handle. I had 1 inch thick doors so I used 1 1/4" long screws. If anyone likes the style but needs a different size let me know. I could modify these to fit most sizes. I included the Sketchup file as always.
-- Photo update:
Shown in white as a pair installed.
Liked ByView All
Give a Shout Out
Cabinet Handle 3-1/2" (89mm)c.c. by 2n2r5 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure 2n2r5 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).