X axis belt tensioner
by rowbert, published
Here is my attempt at a X axis belt tensioner. it has served me well, and I hope it helps y'all out.
slots over the Right hand side nut trap on the z axis. also has bolt holes for fastening if required.
You will need a few bits of hardware, a roughly 20mm bit of 8mm thread bar, 2 nuts and 2 washers. i also used a spacer that came with my 608 bearings.
Liked ByView All
Give a Shout Out
X axis belt tensioner by rowbert is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving rowbert a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure rowbert would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).