MONOCHRON Clock Casing
by rmoro, published
I built the open source MONOCHRON clock designed by Lady Ada:
I built it on perfboard using a KS0108-display and parts I already had. Note that my display is smaller than the display from the kit. I built the clock two years ago and now that I have a 3D-printer I could finally create a nice casing for it!
First check that your display fits the window of the casing. If not, re-size the model in the STL-file or edit the SketchUp design. Then create the MONOCHRON clock using perfboard and the instructions you can find online at:
Now print the casing. Insert the perfboard and display. Insert the push buttons and power connector and solder it together. Close the casing using four M3 bolts. You do not need nuts for the bolts, the holes in the casing are just the right size to hold the M3 bolts. Connect a power supply and enjoy your clock!
Liked ByView All
Give a Shout Out
MONOCHRON Clock Casing by rmoro is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure rmoro would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).