Simple Spool
19
Likes
0
Downloads
318
Views
Published on April 27, 2011
Description
A simple spool for your feed stock.
Instructions
Print
2 x Hubs
6 x Spool spacers
you will also need
2 x 608 bearings
8 x 200mm x M6 althread
M6 nuts and washers.
Cut the rods to 200mm, using the rod to tap the holes,(DON'T DRILL OUT) this will help keep the bearing in place.
2 x Hubs
6 x Spool spacers
you will also need
2 x 608 bearings
8 x 200mm x M6 althread
M6 nuts and washers.
Cut the rods to 200mm, using the rod to tap the holes,(DON'T DRILL OUT) this will help keep the bearing in place.
You must be logged in to post a comment.
License
More from Auzze
Thank You Auzze... Great design for some big spools :-) 8-)