Loading

Raspberry Pi Case 2 Top Lid with RasPi Logo

by foosel, published

Raspberry Pi Case 2 Top Lid with RasPi Logo by foosel May 1, 2013

Description

**Note**: This is thing is not maintained on here any more, further development/support it will happen on its [Youmagine page](https://www.youmagine.com/designs/raspberry-pi-case-2-top-lid-with-raspi-logo).
----
This is an alternative top lid for the popular ["Raspberry Pi Case 2" by redpeppr](http://www.thingiverse.com/thing:30572), featuring a Raspberry Pi logo shaped vent as seen in the ["Raspberry Pi case" by HansH](http://www.thingiverse.com/thing:16104).
I like redpeppr's case as it properly encases all ports, but I like the Raspberry Pi shaped vent on HansH's case, so I thought I'd just mix the two.
To create a complete case just print this top lid and either the regular or VESA mount bottom part from [here](http://www.thingiverse.com/thing:30572), add a Pi and be happy.
I printed mine in black PLA with a 0.4mm nozzle, 0.2mm layer height and skin, 20% fill density.

Recent Comments

view all
No, perfectly stable for me.
Hi, does the thin part between the usb and ethernet break easily in your print?

More from Electronics

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag
Hi, does the thin part between the usb and ethernet break easily in your print?
No, perfectly stable for me.
Top