Mendel rotated geared extruder
by JBFromOZ, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Based on the trinity extruder, but rotated 90 so the phidgets stepper does not foul on the X ends
Phidgets 5.18:1 geared stepper x 1
M4 x 50 caphead bolt x 2
M4 washers x 4
M4 nuts x 2
M3 x 8 caphead bolt x 4
C510 (1/4 x 1/2 x .035) springs x 2 from century springs or similar
8mm trinity labs hob x 1
M3 nut x 1
M3 x 25 caphead bolt x 1
608 bearing x 1
8mm x 20mm shaft (or M8 x 20 grub screw, or M8 x 20 threaded rod)
Mendel rotated geared extruder by JBFromOZ is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving JBFromOZ a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure JBFromOZ would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).