Tarp Clip
4
Likes
904
Downloads
473
Views
Published on July 27, 2009
Description
It's a simple tarp clip. All you need to add is a wing nut and bolt.
Update: Print version two, this one is weaksauce Version 2: thingiverse.com/thing:1247
Update: Print version two, this one is weaksauce Version 2: thingiverse.com/thing:1247
Instructions
1. Print on 3D printer.
2. Drill a rope/bungee size hole (at least 0.25") in the thick end.
3. Drill a 0.25" hole through both jaws near the teeth.
4. Place a bolt and wing nut through the hole near the teeth to tighten.
I don't have access yet to a makerbot or similar 3d printer, so please let me know how this looks printed so I can adjust it as necessary.
2. Drill a rope/bungee size hole (at least 0.25") in the thick end.
3. Drill a 0.25" hole through both jaws near the teeth.
4. Place a bolt and wing nut through the hole near the teeth to tighten.
I don't have access yet to a makerbot or similar 3d printer, so please let me know how this looks printed so I can adjust it as necessary.
You must be logged in to post a comment.
More from aylr
cool, could probably be lasered as well, using two runs