The Sproinger - Surprise Prank (mk1)
by ivymike, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The sproinger - wind it up, hide it, bury it, and wait for the suprise!
Requires one sacrificial kitchen timer, as pictured, and one spring (in this example, 1" compressed, 3" expanded). Remove the timer mechanism, and install the printed sproinger parts. If your printer is lame like mine you'll probably need to use a file to adjust the fit a bit...but you oughta be able to get it moving smoothly. Compress the spring halfway so that the "launcher" meshes with the "spinner" and wind the spinner clockwise to set delay. Compress the spring fully and rotate the "launcher" CCW until it bumps the nearer stop, then hide it, place your ammo on top of it, and wait!
The Sproinger - Surprise Prank (mk1) by ivymike is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ivymike a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ivymike would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).