OpenSkan 3D Body Scanner (Non-invasive)
by VirgilVox, published
Scanner is functional now ! openskan.org
There are a few more features I wish to add, such as automated height detection, mount for laser/camera module, and I still need to make it prettier. Its actually more of scanner rig, upon which you can easily add any commercial scanner.
You can find more details on my blog openskan.org
I use parts from openbuilds.com/ !! Much love!
Recent Commentsview all
I'm actually using a heavy duty lazy susan we had lying around in our robotics lab. We normally use it for turrets, but it works perfectly. Right now I just have a crappy geared motor attached to it for prototyping purposes, I have a different motor I'll be using. Trying to keep it low profile.
I was gonna do the pulley method originally, but I thought this would be more aesthetically pleasing and a more direct approach, I may switch to a pulley system, since I've had to add the counterweight anyway. As for the gears on the pole, its actually just timing belt glued to the side.
As for the backsplash, that's only from my original mock up before I got building and playing with scanners, so it wont be in the final iteration. Skanect actually lets you choose a 3 dimensional bounding box for scan. It has built in repair tools as well, I'd get a license if I were you.
I've been pretty backed up with university, so this project has been sitting for a long while, hopefully I'll have more to show later this week. :D
Great stuff. I've actually been working on a similar scanning rig to go with my turntable for full body scans. I'm curious what you're using as the bearing and motor for the turntable? Also, where did you get the gears on the vertical pole for the servo to move the kinect up/down with? I have been working on a pully system rather than a geared approach to move my scanner up/down on a makerslide rail.
IMO, I would not use the backsplash behind the scan area- it is unnecessary. The main thing with ReconstructMe will be to have only the subject on the turntable in the scan volume. If the backsplash is within the volume, ReMe will be "confused" by the fact that the wall is stationary and the subject is turning. ReMe thinks your sensor is moving around the subject and if the stationary object is in the scan it will choke.
Liked Byview all
Give a Shout Out
You must be logged in to post a comment.