ZUMO 220 handlebar mount
by koubekt, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I wanted to replace the original RAM MOUNT for my Garmin ZUMO 220. This is the final version of my own holder for 22mm handlebar on my wife's Yamaha XJ6. Works fine, no vibrations, no problems :)
It will work on any other/similar motorbike with 22mm handlebar and min. 80mm distance between holders.
Make 1 top piece + 2 bottom pieces, You'll also need the original plastic bracket for Zumo 220 (the version for motorbikes with 3 holes for RAM MOUNT), 3 original screws/washers/nuts + 4 new screws M5x50 with conical heads and 4 nuts and washers.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
ZUMO 220 handlebar mount by koubekt is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving koubekt a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure koubekt would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).