Loading

Checkerboard and Checkers

by guberti, published

Checkerboard and Checkers by guberti May 6, 2013

Thing Info

1224Views 423Downloads Found in Games
Report Thing

Summary

This thing is a checkerboard. I have also included checkers, and arranged them so that you can print half red and half black. If you don't know how to play checkers,
http://boardgames.about.com/cs/checkersdraughts/ht/play_checkers.htm
has all the rules. Also, please look at the instructions to find out how to print this thing. This thing was made in OpenSCAD with the following code:
Board:
cube([42,42,1]);
translate([1,1,1])cube([5,5,1]);
translate([11,1,1])cube([5,5,1]);
translate([21,1,1])cube([5,5,1]);
translate([31,1,1])cube([5,5,1]);
translate([1,11,1])cube([5,5,1]);
translate([11,11,1])cube([5,5,1]);
translate([21,11,1])cube([5,5,1]);
translate([31,11,1])cube([5,5,1]);
translate([1,21,1])cube([5,5,1]);
translate([11,21,1])cube([5,5,1]);
translate([21,21,1])cube([5,5,1]);
translate([31,21,1])cube([5,5,1]);
translate([1,31,1])cube([5,5,1]);
translate([11,31,1])cube([5,5,1]);
translate([21,31,1])cube([5,5,1]);
translate([31,31,1])cube([5,5,1]);
translate([5,6,1])cube([5,5,1]);
translate([16,6,1])cube([5,5,1]);
translate([26,6,1])cube([5,5,1]);
translate([36,6,1])cube([5,5,1]);
translate([5,16,1])cube([5,5,1]);
translate([16,16,1])cube([5,5,1]);
translate([26,16,1])cube([5,5,1]);
translate([36,16,1])cube([5,5,1]);
translate([5,26,1])cube([5,5,1]);
translate([16,26,1])cube([5,5,1]);
translate([26,26,1])cube([5,5,1]);
translate([36,26,1])cube([5,5,1]);
translate([5,36,1])cube([5,5,1]);
translate([16,36,1])cube([5,5,1]);
translate([26,36,1])cube([5,5,1]);
translate([36,36,1])cube([5,5,1]);
Checker pieces:
union() {
difference() {
cylinder(3,4,4);
cylinder(1,3,3);
translate([0,0,2])cylinder(1,2.5,2.5);
translate([-0.5,0,2])cube([10,1,1]);
}
cylinder(1,2,2);
translate([0,0,2])cylinder(1,1.5,1.5);
}

Instructions

To print this thing, you should print it in 3 steps.

  1. Print "Checkerboard.stl" in whatever color you want
  2. Print "Checker_no_board.stl in red
  3. Print "Checker_no_board.stl again, but this time in black

More from Games

view more

Thing Info

1224Views 423Downloads Found in Games
Report Thing

Liked By

View All

License

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

All Apps

This extension connects Thingiverse with Makeprintable, a cloud-based mesh repair service that analyzes, validates and repairs most common mesh errors that can occur when preparing a 3D design file...

App Info Launch App
Top