Loading

Traxxas rustler(rear)/stampede aarms

by silentechos, published

Traxxas rustler(rear)/stampede aarms by silentechos May 6, 2013

Description

first thing ever made so this is mostly a test. everything should be within a mm so if this works it should be functional but i have not tested it.

edit 2* fixed the hole and the file is now a solid. Also attached the google sketchup file for anyone that wants to edit.

edit* looking at the image it looks like one of the hole is not all the way through. Was not exported like that so i dont know how to fix it. just poke it the rest of the way through i guess :S

Recent Comments

view all

FIXED!

I have discovered that the sketchup model is not a solid and am working on fixing it. So as of now it's hollow and wont be very strong at all.

i made exactly this also, i haven't uploaded it though. these work just fine if you don't beat them up. the 3d printed parts are a lot more brittle than the nylon originals, so if you do use them, print a few sets and be prepared to do a lot of part swapping...

More from R/C Vehicles

view more

Liked By

view all

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

Instructions

Modeled in mm so import in mm.

Comments

You must be logged in to post a comment.

silentechos on May 7, 2013 said:

I have discovered that the sketchup model is not a solid and am working on fixing it. So as of now it's hollow and wont be very strong at all.

silentechos on May 7, 2013 said:

FIXED!

nickdisney on May 6, 2013 said:

i made exactly this also, i haven't uploaded it though. these work just fine if you don't beat them up. the 3d printed parts are a lot more brittle than the nylon originals, so if you do use them, print a few sets and be prepared to do a lot of part swapping...

Top