Smile Key ring as printed @ PHTI Hamme

by XiaoShiZi, published

Smile Key ring as printed @ PHTI Hamme by XiaoShiZi May 6, 2013

Thing Info

2338Views 626Downloads Found in Hobby
Report Thing


Smile Key ring printed on the open school day @ PHTI Hamme.
As they where milling in alu on the 1st floor, we where printing a simular key ring on the 2nd floor ;-) This was to show the people that the product could also be made without chips or any other leftover.
The print was build with 45% infill meaning using less material to build a product.
smile4_5.stl is to produce 5 in a row.


Xiao Shi Zi.


Printed on the Ultimaker with following settings:
filament_diameter = 2.89
nozzle_size = 0.4
wall_thickness = 0.6
retraction_enable = True
layer_height = 0.2
solid_layer_thickness = 0.6
fill_density = 40
print_speed = 50
print_temperature = 230
support = None
enable_raft = False
filament_density = 1.00
skirt_line_count = 1
skirt_gap = 2.0
retraction_min_travel = 5.0
retraction_speed = 40.0
retraction_amount = 4.5
retraction_extra = 0.0
travel_speed = 150
max_z_speed = 3.0
bottom_layer_speed = 20
cool_min_layer_time = 5
fan_enabled = True
bottom_thickness = 0.2
object_sink = 0.0
enable_skin = False
plugin_config =
model_matrix = 0.707106781187,0.707106781187,0.0,-4.32978028118e-17,4.32978028118e-17,1.0,0.707106781187,-0.707106781187,6.12323399574e-17
extra_base_wall_thickness = 0.0
cool_min_feedrate = 10
fan_layer = 1
fan_speed = 100
fan_speed_max = 100
raft_margin = 5
raft_base_material_amount = 100
raft_interface_material_amount = 100
support_rate = 80
support_distance = 0.5
infill_type = Grid Hexagonal
solid_top = True
fill_overlap = 25
bridge_speed = 100
sequence = Loops > Perimeter > Infill
force_first_layer_sequence = True
joris = False
retract_on_jumps_only = True
hop_on_move = False

start.gcode = ;Sliced {filename} at: {day} {date} {time}
;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
;Print time: {print_time}
;Filament used: {filament_amount}m {filament_weight}g
;Filament cost: {filament_cost}
G21 ;metric values
G90 ;absolute positioning
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F{max_z_speed} ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 3mm of feed stock
G92 E0 ;zero the extruded length again
G1 F{travel_speed}
M117 Printing...
end.gcode = ;End GCode
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+10.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
G1 Y200 F{travel_speed}
M84 ;steppers off
G90 ;absolute positioning


Xiao Shi Zi.

More from Hobby

view more

Thing Info

2338Views 626Downloads Found in Hobby
Report Thing


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag. Print Thing Tag

All Apps

This extension connects Thingiverse with Makeprintable, a cloud-based mesh repair service that analyzes, validates and repairs most common mesh errors that can occur when preparing a 3D design file...

App Info Launch App