Fun Cube Kids
by Dakanzla, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Cube with different forms for kids to play with. The cube has a removable lock on the buttom to pull out the peaces more easely.
All parts can be put together without glue. Just start by pushing three of the side pieces together that they do fit into each other correctely and build a corner. Then take one of the corner peaces an fit it into the two tiny holes of one of the sides from the corner you just built before. Then push the corner piece upwards until the outpointing nipple from the side fits into the whole on the corner peace. Repeat that for all the other corners.
That the corners do fit together corectely, maybe you have to adjust your printers settings first. To check if you did choose the right settings you can print out the "testing corner". If the testing corner fits together, all the other parts will as well.
The corners of each side do have a number from 0-7 on it. That the cube fits together right, just put the sides with the same numbers together.
Have fun an leave me a like or a comment
I used a prusa i3 for my cube. The settings i choose with the best results were:
0,3 mm layer thikness
1 mm thikness for the outer cover
1 mm thikness top and buttom
(20 mm/sec printing speed)
Upgrade this Thing with Thingiverse AppsPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Fun Cube Kids by Dakanzla is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Dakanzla a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Dakanzla would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).