by foxdewayne, published
5-16-2011 I have updated the files so that the parts are 3mm thick. This makes a more stable Dino. Please Enjoy.
Well I've been hopeing that someone would make one of these. Seeing that no one did, I decided to get off my butt and make one myself. I hope others will have some fun with it as well.
I used this dino as my insperation, and then traced the plans in Sketchup. http://www.epiloglaser.com/sc_dino.htm I don't Know who the creater is, but I would like to say thanks for the plans.
I made the files to fit my Mendal Pursa, but you can rearange them or scale them to fit whatever you want.
Print all the parts and then assemble them like a puzzle.
The current scale will print at 2mm thick, which will stand up on it own just fine. If I print it again, I will probably make it a little thicker. I will also have to make the slots wider if I do.
Liked ByView All
Give a Shout Out
Dino by foxdewayne is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure foxdewayne would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).