by jameswood, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
My shower had two screwholes in the wall, about an inch vertically apart. (24mm to the civilised chaps.) Leftovers from a previously borked soap dish from a bygone era.
The Pebble smartwatch makes a pretty fantastic waterproof remote for my shower tunes, but doesn't like constant exposure to hot water. And who wants to wash with a watch on, anyway?
So. The mission was clear. Mount the pebble on the wall.
Now. Off to the shower with Bon Jovi and ZZ Top, as god intended.
This should work with one screw, two about an inch apart, or just some adhesive on the back. 3M's Command system would be good, I'd say.
Mine's screwed for optimum awesomeness. Screwing in the shower? Highly recommended.
Pebble Wall-Mount by jameswood is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving jameswood a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jameswood would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).