Power Wheels Ninja Quad Steering Knuckle mk2
by ivymike, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
steering knuckle for power wheels, to replace a broken one. this is a much stronger one than the one I previously posted.
pretty simple - print and install. The old one was held in place w/rivets, and I had to drill them out and replace w/screws. This knuckle is a larger/stronger one than first one I printed, since the first one I printed broke after a few weeks of additional play (too many crashes into the fence at full speed, apparently).
Update: This one is still going strong, and has had a couple months and about 20 miles of rough use put on it.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Power Wheels Ninja Quad Steering Knuckle mk2 by ivymike is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ivymike a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ivymike would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).