BAKFlip Tonneau Cover: Rod Clip
by Tooltutor, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The stock clip is slightly oversized & flimsy. You can buy replacements from the factory for $0.75 (#15-1600) but these printed ones are tighter and stronger; especially if you print them out of Ultem or equivalent. ABS-type materials will break more easily.
This updated clip features a rear step to snug up to the bottom of the mounting rail as well as a slotted hole for the sloppy positioning from the factory.
To keep up with my shenanigans, check out my blog at http://tool-torials.com
Print sideways to minimize support material.
Install with existing screws from old clips.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
BAKFlip Tonneau Cover: Rod Clip by Tooltutor is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Tooltutor a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Tooltutor would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).