by infinityplusplus, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Print out one body, key, pin and top. Print out 2 feet. The pin holds the top to the body. Paint the eyes if you so choose.
I have uploaded some files with 50 at the end. The original files are rather large. If you want to scale it to 50 percent it will make the pins very weak. They are already pretty thin because I print in PLA and I didn't want them to be too stiff to work. So these are as of yet untested pre-scaled parts that are a little thicker in the pin area.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bob-omb by infinityplusplus is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving infinityplusplus a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure infinityplusplus would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).