Downloads
MFGKinectMountv1E.stl
1 mb /
73 downloads /
9 months ago
They Like It
Kinect Camera Tripod Mount with Embedded Threaded Insert by mifga is licensed under the Attribution - Non-Commercial - Creative Commons license.
© 2011 by mifga
Instructions
1. Print the body of the mount.
2. Drop in the threaded insert.
3. Turn on the extruder and fix the threaded insert in place by filling the cavities around the mounting spikes.
4. Clean out the countersunk holes on the back for the M3x12mm bolts with a file or screwdriver.
5. Sand away any residual plastic that might interfere with firm, flat mounting.
6. Fasten 4 M3x12 bolts down into the four tiny holes on the Kinect. You should be able to create threads and mount the Kinect reliably. Be gentle when/if you unscrew the bolts such that you can re-use the threads a second time.
6. Research Kyle McDonald's Processing sketches so that you can 3D scan somebody!
