Parametric Arduino Case
by pchretien, published
This is a completely customizable Arduino case made with OpenScad. You can configure the height and thickness of the walls and bottom of the case.
I uploaded three versions of the case to demonstrate what can be done with the OpenScad file. You can also make your custom version of the case by editing the global variables in the OpenScad file.
UPDATE: You may want to increase the size of the arduino variables by 1mm and add 0.5mm to connectors position variables if you plan on printing with a wall thicker than 2mm.
The white print displayed here has been print with the following values in the openscad:
arduino_width = 55;
arduino_length = 70;
arduino_usb_x = 10;
arduino_power_x = 4;
Liked ByView All
Give a Shout Out
Parametric Arduino Case by pchretien is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure pchretien would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).