Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Sink Strainer - Drain Catch
by UrbanAtWork, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
If you print one, please post a Make as a "thank you".
This goes in a drain and catches stuff too big to go through the holes.
This is a corrective remix of HarlanDMii's Drain Cover that was having trouble rendering online and in OpenSCAD.
-- STL Version 1.9-4 has the fluted post (handle) and should be printed with high fill or a thick shell since the skinny part is prone to breaking if hollow.
-- I've added a non-customizer file in a zip file.
-- Added a 0.2mm "helper disk" to help printing adhesion.
I have a few more things to release in the next version, if time allows...
I don't think that they scaling feature works correctly since the the 38mm one I just tested seems to be 40mm in Makerware.
Note: I've included a "Hi Res" STL version of the 40mm file. It is probably easiest to just use that one and scale it in your slicer rather than try to customize the correct scale.
Until the customizer version has more features, I would recommend that you simple download the "HiRes" STL file and scale it in your slicer for the correct diameter.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Sink Strainer - Drain Catch by UrbanAtWork is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving UrbanAtWork a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure UrbanAtWork would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).