by jayprice6328, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I found this file a while ago and started to see another variation of someone elses file so i decided to share this one! (Most likely the same file)
Cut it out with the laser cutter, but make sure that you use 1/8th inch materials because that is wht the slots are sized for on this file, you can alter them for thicker material if needed. After you cut it out, if your having a hard time putting the pieces together then you can refer to the picture.
Lasercut Dinosaur by jayprice6328 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving jayprice6328 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure jayprice6328 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).