by beatbots, published
Designed by BeatBots for MAKE Magazine.
Video at vimeo.com/26191062
Recent Commentsview all
I've been working on building a Spazzi using the guide created at http://makeprojects.com/Projec... -- which I first read about in MAKE Vol. 27 -- and, if I'm interpreting the STL files correctly, the diameter of the hole being used in the plastic pieces that need to be constructed are approximately 20mm in diameter which would be for the 3/4" diameter Solenoid part #C12-24C12DC-AY that I found at http://www.mouser.com/ProductD... -- but, regrettably, this part is obsolete. That being the case, I had purchased three of the 1" diameter Solenoid part #C16-32C12DC-AY at http://www.mouser.com/ProductD... -- which was still in stock.
For the 1" diameter Solenoid to fit, my thought is that I would just need to scale the STL file 4:3, but I'm not sure if that would be the case.
For instance http://www.fabbr.com/p/custom-... they can give you a quote (please post back the information somewhere).
Liked Byview all
Give a Shout Out
You must be logged in to post a comment.