by cymon, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Needed a spike for holding down the hose in the garden. Can't just use a piece of bent wire can I?
The x6.stl is spaced so using ditto on sailfish will double the output producing 12 instead of 6.
(Posted version is reenforced from the ones shown in the picture but I recomend an aceton vapor bath before using them to solidify the outside.)
For more information see http://joesmakerbot.blogspot.com/2013/05/making-hose-spike.html
Tent/Hose spike by cymon is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving cymon a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cymon would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).