by ChristianSilva, published
Flexy Arm is based in the Flexy_Hand 2 from Steve Wood (Gyrobot), The RIT arm (Rochester Institute of Technology) and the work of the e_NABLE group ( http://enablingthefuture.org/ ). all this files are covered by creative commons attribution license. Non-Commercial
Videos Using the 3D printed Prosthesis arm
All parents and children were informed about the research study and signed a parental permission. For Children 3 to 16, an assent was explained by the principal investigator and signed by the children and their parents. Written informed consent from the parents was obtained in order to publish the images and videos shown in the research study and investigation. Futhermore, detailed safety guidelines were given to parents regarding the use and care of the prosthetic arm.
Detailed safety guidelines link:
It´s the Left Arm, Fingers are printed in Flexy Material, Hand Body, Forearm and Arm in PLA Material.
For more information:
Ms. Eng. Christian Silva, Bogota, Colombia. e-NABLE Volunteer
Universidad Nacional de Colombia
Liked ByView All
Give a Shout Out
Flexy-Arm Remix by ChristianSilva is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
We're sure ChristianSilva would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).