Beautiful Chunky Bracelet
89
Likes
1282
Downloads
4867
Views
Published on May 31, 2011
This thing was Featured on June 1, 2011
Description
Simple. Elegant. Parametric Faceted bracelet that any lady would love. Looks like a nut. Guess that makes her arm the bolt. =) The must have accessory of the year! As seen on CES 2012 runway, MAKE magazine, and Robot Film Festival red carpet.
My first 3D printed project! Here's the OpenSCAD and STL files.
Collaborative project with thingiverse.com/beatbots
My first 3D printed project! Here's the OpenSCAD and STL files.
Collaborative project with thingiverse.com/beatbots
Instructions
3D print this bracelet on your makerbot and have fun painting and decorating it. You can print it in different colors and glue rhinestones on it. Mine is spray painted gold and silver.
*********Parameters Defaults*********
wristRadius = 32.5; //change based on your how wide you want the inner ring. I measured the radius of my clenched fist
width = 30; //determines the height of your bracelet
sides = 6; //You can tell it how many sides you want now -- change it from 6 to 8 and so on, see how it changes in OpenSCAD.
angle = 20;
*********Parameters Defaults*********
wristRadius = 32.5; //change based on your how wide you want the inner ring. I measured the radius of my clenched fist
width = 30; //determines the height of your bracelet
sides = 6; //You can tell it how many sides you want now -- change it from 6 to 8 and so on, see how it changes in OpenSCAD.
angle = 20;
License
Beautiful Chunky Bracelet by tinkerbelle is licensed under the Attribution - Share Alike - Creative Commons license.
About how long did this take to print?
Thanks
About 30 minutes for the original size. You can reduce the print time by making the bracelet thinner