ATtiny13V 8SOIC to 8DIL breakout
by EverydayInventors, published
Description
While making an order at a large on-line parts supplier I added a hand-full of low-cost ATtiny13V microcontrollers to my order as an impulse buy. It was only after my order arrived that I discovered I had accidentally ordered the SOIC version rather than the DIP version of this chip. No problem! With a little work in EAGLE it is possible to design a small breakout board to convert the 8pin SOIC chip into a breadboard friendly 8pin DIL package with the added benefit of a reset switch and an in-system programming header.
I haven't actually built this thing yet, so there are no guarantees it will work. Next time I have a batch of prototypes manufactured I'll throw this design in also to test. I'll update this post/thing accordingly.
Update: it works.
Update: it works.
Tags
License
ATtiny13V 8SOIC to 8DIL breakout by EverydayInventors is licensed under the Creative Commons - Attribution - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
This is a rather small double-sided board with small traces so it may be better to have the PCB manufactured rather than etching at home.
Solder the ATtiny first, then populate the other components on the top side with the exception of JP1 and JP2. These should be populated on the bottom side so you can plug the breakout into a breadboard.
Update:
Schematics and firmware example are on github at github.com/EverydayInventors/13VSOIC2DIL
Solder the ATtiny first, then populate the other components on the top side with the exception of JP1 and JP2. These should be populated on the bottom side so you can plug the breakout into a breadboard.
Update:
Schematics and firmware example are on github at github.com/EverydayInventors/13VSOIC2DIL
ATtiny13V 8SOIC to 8DIL breakout by EverydayInventors is licensed under the Creative Commons - Attribution - Share Alike license.
Download All Files
(28 kb zip file)
Comments
You must be logged in to post a comment.
