Over the Top Mendel Max 2 Spoolholder for 8mm Rod
by Coherent, published
This is a derivative of http://www.thingiverse.com/thing:77301. I really liked the design of the spool holder but it was designed for a 10mm tube and I wanted to be able to use standard skate bearings on my filament rolls. I redesigned the holder to accept a 8mm or 5/16th solid rod. I have printed it and it works perfectly!
Mentioned in more detail here:
I just printed mine out of PLA. This is one of the first prints that I did so please excuse the poor quality print but it functions perfectly!
Liked ByView All
Give a Shout Out
Over the Top Mendel Max 2 Spoolholder for 8mm Rod by Coherent is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
We're sure Coherent would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).