80mm Fan Frame-mount for Reprap printers
by mrice, published
This is a mounting kit I made to attach an 80mm fan on the side of my Prusa printer for cooling.
The kit has three parts: A frame rod clip, a slotted arm, and a fan frame. It has multiple axis of tilt to adjust for wherever you place it. You will need a couple 10mm M3 screws and nuts to assemble it, plus the appropriate screws (M3 or 4-40) for your fan. There is a small integrated clip to secure the fan wires to the slotted frame to keep things tidy.
The frame clip piece is designed with M8 threaded rod in mind. You can clamp it securely to the bar using the provided holes in the side of the clip, although I have found it to be very secure without any extra help.
The parts have a printed volume of 15.56 cubic centimeters, and require a build volume of 81x81.5x12.7mm.
Liked ByView All
Give a Shout Out
80mm Fan Frame-mount for Reprap printers by mrice is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving mrice a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure mrice would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).