Eccentric Sphere Gears
by crsdfr, published
0
Share
2508
277
Report Thing as Inappropriate
Description
So I took whosawhatsis awesome Eccentric Sphere Gears and re-worked it to be a single part assembly. I took the existing holes in the gear parts, inverted them, booleaned them to the central hub, then offsetted inwards by about 0.3mm.
Recent Comments
view all
It looks like the gears on this can pop off? am I correct in thinking that this is all SLS no screws required? IF so will the pieces come apart? I'm thinking of printing this on our SLS 2500 plus but only if its solid and will not come apart.
Hi there :)
Part was made on an SLS Machine out of Nylon. Pretty much only SLS or Polyjet printers will be capable of making this.
Very nice pocket toy. What did you make this out of? It doesn't look like and extrusion 3D. Powder?
2508
277
Report Thing as Inappropriate
Remixed From
Tags
License
Eccentric Sphere Gears by crsdfr is licensed under the Creative Commons - Attribution - Non-Commercial license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Probably only going to be possible on a machine capable of both quite fine detail and support structure.
Eccentric Sphere Gears by crsdfr is licensed under the Creative Commons - Attribution - Non-Commercial license.
Download All Files
(1 mb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
It looks like the gears on this can pop off? am I correct in thinking that this is all SLS no screws required? IF so will the pieces come apart? I'm thinking of printing this on our SLS 2500 plus but only if its solid and will not come apart.