Goal Post joints for 600 x 350mm goal
by Roboteernat, published
1864
942
Report Thing as Inappropriate
Description
I was asked to attend the Royl Cornwall Show in the UK with my work this week, and I am going to be demonstrating Robotic Football using our teaching robots.
Thing is, all the goals were being used, so I wanted something visually good looking to represent the goal.
What better way to do this than to make a set of goals!
Thing is, all the goals were being used, so I wanted something visually good looking to represent the goal.
What better way to do this than to make a set of goals!
1864
942
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Print 2 of each part.
Using overflow pipe (OD 22mm ID about 19.8mm) cut to the required lengths to make your goal. This can be made using a standard 3 meter length of pipe.
Mine is designed to accommodate robots standing 35cm tall.
The lengths i cut were:
1 x 600mm cross bar
2 x 90mm top corner
2 x 330mm front bars
2 x 350mm side base
2 x 415mm hypotenuse bars.
push the 3 corner piece into the 90mm, 330mm and 600mm piece.
Push the 2 corner piece into the 330mm and 350mm piece.
Push the 2 rear bent piece into the 415mm piece.
push the 2 bent corner piece into the other end of the 415mm piece and into the 90mm piece.
Create the other side in the same fashion to create a goal post!
Set your robots off on their quest to reign supreme in the 2050 world cup!
I have attached the original sketchup files, as only 1 part has rounded edges. I run out of time to make them all rounded.
Using overflow pipe (OD 22mm ID about 19.8mm) cut to the required lengths to make your goal. This can be made using a standard 3 meter length of pipe.
Mine is designed to accommodate robots standing 35cm tall.
The lengths i cut were:
1 x 600mm cross bar
2 x 90mm top corner
2 x 330mm front bars
2 x 350mm side base
2 x 415mm hypotenuse bars.
push the 3 corner piece into the 90mm, 330mm and 600mm piece.
Push the 2 corner piece into the 330mm and 350mm piece.
Push the 2 rear bent piece into the 415mm piece.
push the 2 bent corner piece into the other end of the 415mm piece and into the 90mm piece.
Create the other side in the same fashion to create a goal post!
Set your robots off on their quest to reign supreme in the 2050 world cup!
I have attached the original sketchup files, as only 1 part has rounded edges. I run out of time to make them all rounded.
Download All Files
(198 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
