Pentad Laser Harp Sensor Module with Lens Stabilizer
by nameless911, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Laser harp's pentad sensor with lens stabilizer. Can stabilize laser harp's beam.
1.Make circuit with iModela. Setting is milling depth :1mm/path, speed:1mm/s.
2.Make circuit with phototransistor and resistor(10kÎ©) and 7pin pin header.
10kÎ© resistor: http://akizukidenshi.com/catalog/g/gR-16103/
pin header :http://akizukidenshi.com/catalog/g/gC-00167/
3.Make two lens holder and sensor base with Modela or 3D printer.
4.Get five film with lens's main lens(f: 28mm).This is called ä½¿ã„æ¨ã¦ã‚«ãƒ¡ãƒ©(Tsukaisute Camera : means one time use Camera) And can get from print shop.
5.Sandwitch lenses with lens holder like skp file.
6.Assemble all parts like skp file.
- Make LaSER HaRP (like fig 2)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Pentad Laser Harp Sensor Module with Lens Stabilizer by nameless911 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving nameless911 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure nameless911 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).