Loading

Formosan Black Bear

by amaochan, published

Formosan Black Bear by amaochan Jul 10, 2015

Featured Thing!

Contents

A part of these Groups

View All

Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

98578Views 20558Downloads Found in Art

Summary

Design Software - SketchUp
my settings
ABS
support angle 40 deg
z resolution 0.15mm
scale 100%
https://www.facebook.com/paperworkers
https://www.facebook.com/automata.create
Watch the video: https://youtu.be/7eYV7p-IQDg

台灣黑熊目前現存族群數量不多,出沒於台灣中央山脈是臺灣特有的亞洲黑熊亞種,胸前有V字型斑紋是它的特徵。

我會創作這隻黑熊是因為發生在台灣真實的黑熊事件。
台北市立動物園裡有一隻名叫「小三」的母台灣黑熊。因為被捕獸夾給夾斷了右前腳,只剩三隻腳所以被取名為「小三」。這隻可憐的黑熊之後借給了高雄的壽山動物園,竟然於2013年的12月在高雄壽山動物園內當著群眾面前被另一隻黑熊咬死。高雄壽山動物園隱瞞這個不幸消息,直到一個月後才對外發布這個悲劇。這個新聞讓我很難過,所以我設計了這隻黑熊,以紀念這不幸的事件。

The number of living Formosan black bear population is currently small, spotted in Taiwan Taiwan's Central Mountain Range is a unique subspecies of the Asian black bear, chest V-shaped markings are its characteristics.

I will create only black bears were glad to hear the story of a Formosan black bear.
Taipei Zoo has one called "mini three" female Formosan black bear. Because arrested beast clip to clip off the right front leg, leaving three feet so was named the "mini three." After this poor black bear lent Kaohsiung Shoushan Zoo, even in December 2013 by another black bear killed in Kaohsiung Shoushan Zoo. Kaohsiung Shoushan Zoo conceal this unfortunate news released until a month after the tragedy.The news made me very sad, so I designed only bears to commemorate this unfortunate incident.

More from Art

view more

All Apps

This App connects Thingiverse with Makeprintable, a cloud-based mesh repair service that analyzes, validates and repairs most common mesh errors that can occur when preparing a 3D design file for p...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

cutest bear ever!!!

很棒的作品!

謝謝

Great design ! Really cool model.

I added a small piece of filaflex filament on each rotating joint, between the clips to add friction.

so cool I love it!!!!!!!!!

What is your 3D printer model ?!

Great work!! any idea how long you need to make the panda model a thing?
Keep up the good work!

There are other work, the short-term can not be completed.

paws facing wrong way in all black full plate

New update (black bear-all( black)-2)

哈囉~ 感謝你分享這麼棒的圖!! 我昨天做了熊熊頭,非常棒!! 可以今天要做左手的時候出了問題,因為你把手掌朝下,所以底部很不穩,我用MakerBot印的時候前幾層都有問題。 可以請你幫忙把原檔轉成手掌朝上 手背朝下嗎? 我不會用。 感謝!!

Oct 3, 2015 - Modified Oct 3, 2015
amaochan - in reply to tomjordan35

謝謝你喜歡我的作品,我已經把手翻轉並且上傳檔案了,你可以下載。印出來記得要分享照片。

感謝你!! 下周末應該就可以完成了!! 到時候再分享:) 不過我的是橘熊 哈哈

橘色的也很棒,我很期待。

Comments deleted.

um can I have this?

Just download you will have.

I am having trouble pressing the white eyes into the head. Do you have any hints?

Sep 16, 2015 - Modified Sep 16, 2015

This is sooooo amazing and so cute ! I love it so much!!!! You are such a fabulous maker!

Thanks

Hey, I really love this print and was wondering if you would like to try a sample of our 1.75mm PLA filament and see how it works out! Free filament and free shipping just contact me at [email protected] and I can get you set up! Thanks and again great print!

I appreciate your kindness, but I live in Asia, Taiwan, your mailing cost is too expensive.

大大,他的意思是你想不想試試看他們的料。 他們會免費提供料給你,運費也是他們出。

我知道他們要出運費,只是不好意思白拿人的東西,我無以回饋。

Looking forward to the panda - thanks CJR UK

大大 你太強了~~~ 感謝設計出來這麼棒的東西!!! 拿來送給朋友剛剛好...

把印出來的黑熊照貼出來分享吧!若是能拍成停格動畫就更好了。

FABULOUS - made 2 so far and will be printing more for friends, thank you CJR UK

Comments deleted.

I posted a make but wanted to let you know that I had an issue with printing the black parts due to how the hands are placed in the black_bear-all_parts file. I would recommend turning them on the backside like I did and they print without supports.

Thanks for sharing.

Aug 15, 2015 - Modified Aug 16, 2015
amaochan - in reply to Motley74

Thank you for your comments. But beauty or easy to print and choose one, I choose beauty.

Aug 11, 2015 - Modified Aug 11, 2015
amaochan - in reply to hsuaya

謝謝

how long does it take to print on an ultimaker?

I have never used Ultimaker,so I can not answer your question. I use UP+. So I can tell you,it takes about ten hours to print on the UP+.

looks like kumamon!

Could u do a solid version that does not have moving parts. my printer is not that great and couldn't do all the small pieces.

Sorry! limb movements is the focus of my design, so I can not give you solid version.

I checked the file no problem. Please re-download, or download the individual parts and print again.

Updated program for the printer.
Bear found the real form.

hello :)

this looks amazing - > is it oke for me to print this and than make a short video with it?
i will post it on youtube as a non paying video ( with no adds )
and will also post it on the makes page !

hope to hear from you :)

AMAZING CREATION

Welcome to made into a movie! But please observe the following conditions 1. not commercial purposes. 2. noted designer and a fan page(https://www.facebook.com/paperworkers) on youtube videos. 3. Do not shoot violent or pornographic images. Hope before uploading videos, please give me a look! I will not interfere with your creativity!

Thank you very much !! an i will keep the video KID save :)
no violant shots or Por**.

and i will send it to you as soon as its done :D so you will be the first to checkt it out

When/where will we be able to get the panda!?!?!?!

Aug 9, 2015 - Modified Aug 9, 2015
amaochan - in reply to mmcnama4

Panda is still paper model, it has not been modified into 3D printing files.Please give me more time!

Take your time. Love your models! Looking forward to the panda.

Brilliant, 水啦!

謝謝,希望大家印得開心。

Arm clips design is no problem, you can see other maker do out of the finished photos. Each arm needs two arm clips, assembly methods look at the third picture, if you still can not successfully assembled, may be insufficient precision 3D printing machine.

The arm clips do not work very well. Do not like that idea.It's a shame.

They should just have normal pegs or some better design. Other than that, I like it.

謝謝你們的欣賞,大家的鼓勵給我創作的力量。

Very cute, thank you!

Thank you like my work, give me a little time, I will complete these works.

Love it, I can't wait for next one, please the PANDA, PLEASE , PLEASeeeeee

感謝您的分享! 感恩!

Top