Horse-thingi
by offcentercreations, published
3230
496
Report Thing as Inappropriate
Description
This Thingi was compelling to export to .stl from .blend. There were many disableing factors but indeed after five hours of export alter export I finally got it printable. It made me happy, well except that it took over two hours to print. But it looks good. There is still more learning to be had from this file so I shall now post it for anyone to experiment with.
The single STL file(horse1.stl) is all that is needed to print this Thingi but I will post the blend also just in case.
The single STL file(horse1.stl) is all that is needed to print this Thingi but I will post the blend also just in case.
Recent Comments
view all
aye, just drill a whole in it's head and put a piece of backed out filament into it to make it into one.
This cries for a mashup :-)
but you can print this - http://www.thingiverse.com/thi... - in the meantime :)
What? No unicorn version?
3230
496
Report Thing as Inappropriate
Tags
License
Horse-thingi by offcentercreations is licensed under the Creative Commons - Attribution - Share Alike license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Print file, clean file.
Horse-thingi by offcentercreations is licensed under the Creative Commons - Attribution - Share Alike license.
Download All Files
(233 kb zip file)
Comments
You must be logged in to post a comment.
What? No unicorn version?
aye, just drill a whole in it's head and put a piece of backed out filament into it to make it into one.
This cries for a mashup :-)
but you can print this - http://www.thingiverse.com/thi... - in the meantime :)