Holder for ducted cooling fan
by Mothra78, published
0
Share
875
376
Report Thing as Inappropriate
Description
I wanted to use the ducted cooling fan (http://www.thingiverse.com/thing:5756) on a Brutstruder but it didn't fit between the Dinos. So I created this little block that raises a bit the Dinos (gives you 15mm additionnal height) and allows to fit the fan.
Recent Comments
view all
it's working well for me, the air seems to flow down the heater towards the tip.
I have printed calibration walls with and without the fan and it makes a huge difference. It also help when printing narrow parts to avoid having a molten blob at the top.
How is this working out for you? I'm having the same problem, but he fan up so high doesn't necessarily look as if it would help much.
875
376
Report Thing as Inappropriate
Tags
License
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
Print two blocks
Place under Dinos and bolt to Z stage
Place under Dinos and bolt to Z stage
Download All Files
(24 kb zip file)
Comments
You must be logged in to post a comment.
How is this working out for you? I'm having the same problem, but he fan up so high doesn't necessarily look as if it would help much.
it's working well for me, the air seems to flow down the heater towards the tip.
I have printed calibration walls with and without the fan and it makes a huge difference. It also help when printing narrow parts to avoid having a molten blob at the top.