7 and 3 Gear Coasters DXF in mm for 600 x 300 laser cutter
by BodgeItQuick, published
5129
603
Report Thing as Inappropriate
Description
All of the extra cutting lines removed from the original DXF drawings and a 7 coaster set added for house hold use and the original 3 coaster set for workshop use.
Used this as a learning exercise for testing and setting up an old 50W Universal M-300 laser cutter.
The engraving is now vector engraving as Raster engraving not working on this old laser cutter. ;-( Engineer is booked to come out and fix it. So was a good test peice.
Used this as a learning exercise for testing and setting up an old 50W Universal M-300 laser cutter.
The engraving is now vector engraving as Raster engraving not working on this old laser cutter. ;-( Engineer is booked to come out and fix it. So was a good test peice.
5129
603
Report Thing as Inappropriate
Remixed From
Tags
License
7 and 3 Gear Coasters DXF in mm for 600 x 300 laser cutter by BodgeItQuick is licensed under the Creative Commons - Attribution license.
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing Tag
Instructions
As the original Thing.
To cut on a 50W Universal M-300 laser cutter I set for 6mm wood cutting and vector engraving set to 100% power 80% speed and 500 PPI.
Maybe there is a need for Software used under tools.
Software used: Solid Edge 2D drafting ST3 (The free version)
Problems with using this software are the need to set lines from the smalest predefined line size of 0.35mm to 0.01 mm and the ouput/ printer sheet origin being bottom left instead of top left. I have yet to figure out how to set a drawing sheet origin to be the other way around.
Setting the custom Sheet size as a default custom sheet size eg 600 x 300
fails to save it as a new custom sheet size.
To cut on a 50W Universal M-300 laser cutter I set for 6mm wood cutting and vector engraving set to 100% power 80% speed and 500 PPI.
Maybe there is a need for Software used under tools.
Software used: Solid Edge 2D drafting ST3 (The free version)
Problems with using this software are the need to set lines from the smalest predefined line size of 0.35mm to 0.01 mm and the ouput/ printer sheet origin being bottom left instead of top left. I have yet to figure out how to set a drawing sheet origin to be the other way around.
Setting the custom Sheet size as a default custom sheet size eg 600 x 300
fails to save it as a new custom sheet size.
7 and 3 Gear Coasters DXF in mm for 600 x 300 laser cutter by BodgeItQuick is licensed under the Creative Commons - Attribution license.
Download All Files
(51 kb zip file)
File Name
Downloads
Size
Comments
You must be logged in to post a comment.
